• about 7 foot 9 inches long
• made from 1.5 inch diameter galvanized pipe
• there are no hooks on the ends - use straps, zip ties, bolt them to posts, etc.
• the panel shown in this picture has post legs that make the bottom gap ~14 inches, with out the legs the gap would be about 2.5 inches
• other 8' panels have hoop legs - the vertical pipe comes to the ground and then loops back up in a "J" shape up to the bottom rail (see the left hand end of the 10 ft gate shown below for an example).
• spacing between the rails is approximately 10 inches, height is about 60 inches
• these are for sale for $30 a piece

The 10 foot panels:

• measure 9 feet 9 inches
• do not have "extension legs" so the bottom rail has a ground clearance of about 2.5 inches
• same as 8 ft panels - no hooks on ends so use straps, zip ties, etc.
• spacing between the rails is about 10 inches and same number of rails as 8 ft gate shown above
• between 50 and 51 inches tall
• 1.5 inch galvanized pipe
• these are for sale for $40 a piece.

The 10 foot panels with gates:

• 10 feet long
• the door opening is about 4 feet wide
• and gate is secured with a chain that goes over a hook
• the gate can be hinged on either side of the opening
• no hooks on ends of panels - use straps, zip ties, etc. to link together
• when walking through the gate frame, the clearance is about 71 inches
• These are for sale for $50 a piece.